Категорија: Products
-
Pelet set Star KBM
-
Pellet Burners (15-35kW)
Pellet Burners are produced in power range: from 15 to 35kW from 35 to 70kW from 70 to 120kW from 120 to 200kW from 200 to 350kW <iframe width=“420″ height=“315″ src=“https://www.youtube.com/embed/25GMgLky0A0″ frameborder=“0″ allowfullscreen></iframe>
-
Combined solid fuel and pellet boiler STAR KBM+
Hot water combined solid fuel boiler and pellet boiler Star KBM+,in power range 15-80kw, is made for burning pellets and solid fuel(coal, wood, large wood waste) ,minimum inferior calorific value Hd=16.000[kJ/kg]. Because of construction of a boiler, you could make transition from solid fuel to pelet, and reverse, very easy and fast, without removing the burner. […]
-
Low-pressure steam boiler
Low pressure steam boiler for liquid or gaseous fuel NP Eko Eko NP block the steam boiler liquid and gas fuel designed for smaller technological consumers who used saturated vapor pressure of 0.5 bar. The boiler is filled with water from the municipal water supply system, which was previously prepared in the unit for water softening. The boiler […]
-
Accumulation Tank-NEW
Accumulation tank-NEW
-
High Pressure Steam Boiler
Work in progres…
-
Stove SUPERNOVA
Thanks to the unique design stove SUPERNOVA provides a unique feeling of heat immediately after firing. It is constructed so that its walls which consist of steel pipes, in addition to good looks the stove operate on the principle that the heat goes up. Thanks to the openings at the top and bottom of the tube, the […]
-
Daily tanks for crude oil
Work in progress…
-
Seasonal tank for crude oil
Seasonal tank for crude oil 2-100m3. Seasonal tank for crude oil is used for storage of the crude oil or other heavy liquid fuel, necessary for smooth the operation of heavy liquid fuel boilers during a heating season. The tank is made of steel, like a closed cylindrical horizontal vessel. It is designed for installation in the […]
-
Tanks for liquid fuel with one or two sheat
Steel tanks for liquid fuel with one or two of the sheath 5-90m3. Steel tanks are designed for easy storage of liquid fuels and other non-aggressive fluids. Tanks are designed for a working pressure of 1,5bar, and are made of sheet steel with welding. Special accessories are installed on the lid of an inspection opening. Tanks are corrosion […]